ImgBurn full changelog

# Added: Holding the ALT key when clicking on DLE window's Disc pane column header will now remove the sort order (so they're then essentially sorted by addition order).
# Added: Ability to incrementally search the Explorer pane in the 'Disc Layout Editor' window.
# Added: The effective USB connection speed (1.1, 2.0, 3.0) for USB devices to the initial device scan log entries.
# Added: Log entry when burning showing the effective layer break position.
# Added: Log entry when burning that shows the number of discs a Lite-On drive thinks it has burnt.
# Added: Pioneer drives now list their 'Kernel Version' next to the firmware version.
# Added: The Windows 7+ taskbar button/progress display now turns red if an I/O error box pops up during a read/write (etc.) operation.
# Added: The ability to set the 'Platform ID' when building a bootable disc - thus enabling the creation of UEFI bootable discs.

# Added: Additional info (service name and driver version for hard disk controllers) to the 'Family Tree' text.
# Added: 'Supported Read Speeds' to the disc info text in Read/Verify modes.
# Added: New log entry (when burning DVD-RAM/HD DVD-RAM/BD-RE) showing the current state of the 'Hardware Defect Management' feature on the drive. When active, the drive would 'normally' take longer to burn a disc due to the automatic 'verify after write' process.
# Added: Option to use the system default language. When an exact match cannot be found (i.e. the correct translation file is missing from the Languages folder), the program will attempt a partial match.
# Added: Ability to perform LiteOn's SmartErase functions.
# Added: Show 'MID' in the 'Disc Information' section of the text on the right - easier to find and always available under the same heading.
# Added: Ability to translate the image/disc size values on the recently added 'Overburn / Truncate' prompt.

· Added: Option to truncate image (not physically!) when burning to a smaller disc rather than always attempting to overburn.
· Added: New 'Create BDMV Folders' option to the Blu-ray Video options in Build mode. This ensures the BDMV folder contains all the basic folders required for successful playback in PowerDVD.
· Added: New 'Clear Bin Status' button to the Auto Loader Control window. This only applies to Generic auto loaders and tells them to revert to using the first lot of input/output bins.
· Added: Workaround for autoloaders that don't report an error when the input bin is empty and cause the program to keep loading and unloading non-existent media as part of a batch mode read/queued write operation.
· Added: Option to log skipped 'non archive' files/folders in Build mode - files without their 'archive' attribute set (this is nothing to do with zip, rar files etc. !).
· Added: Workaround for Wine bug #22079
· Added: Workaround for Wine bug #27559

· Added: Support for Plextor PX-870 / PX-880 / PX-L890 drives to be treated as LiteOn drives (rather than true Plextor drives) by the 'Book Type' / 'Advanced Settings' code. This negates the need to manually enter the Device IDs in the 'Configure Drive OEM' window.
· Added: Support for /NOSAVELOG command line switch (see ReadMe.txt for usage).
· Added: Support for /FILESYSTEMONLY command line switch (see ReadMe.txt for usage).
· Added: Support for relative paths when reading the boot image file name from an IBB file.
· Added: Proper support for CDI images (including multi-track/session ones) via Padus's PfcToc.dll file (must be present where ImgBurn.exe is).
· Changed: Show a little more firmware version information for LG drives on the Device Capabilities window and when checking for firmware updates. This is useful for drives like the BH10LS30 that display 1.00 when the full version number might actually be 1.00-A9.

· Changed: Remove some more try/catch statements (mainly to do with buffer recovery stuff) in an attempt to get to the root cause of an EInvalidOp error that I've seen in a few bug reports.
· Changed/Fixed: Attempt to clean up the icons created in the wrong location by a bug in v2.5.2.0. It made them in the current user profile rather than the all users profile and could leave you with duplicate icons after installing v2.5.3.0.
· Fixed: Bug introduced in v2.5.3.0 when selecting multiple files in an 'Open File' dialog box under Vista+ (i.e. those using the new IFileDialog code). The first file was being removed from the list of selected files.

# Added: Workaround for the firmware bug present in LG's BH10LS30 drive (probably all BH10 / WH10 drives) where formatting a new BD-RE with full certification enabled produces a disc that still appears as if it's unformatted in various drives.
# Added: Option to have the program automatically set the book type to 'Normal' rather than 'DVD-ROM' when burning a BD Video (BDAV/BDMV folder is present) disc. Some players won't play BD (AVCHD ?) content from a disc with its book type set to DVD-ROM.
# Added: Support for a new '/OPTIMISEDUPLICATEFILES' command line switch which can be used to enable that feature in Build mode as and when it's required.
# Added: 'Add Selected' toolbar button in the DLE window that will add whatever's selected in the Explorer pane's Files box to the compilation.
# Added: 'Display DirectShow Filter List' option to the menu when you right click in the 'Layout' box within the 'Create CUE File' window.

· Added: Built in support for 'ATAPI iHBS' drives for the auto booktype/advanced settins stuff.
· Added: Option within the installer to manipulate the registry key / GPO to do with allowing access to drives within a remote session.
· Added: New icons in Vista / 7 style (rather than the now 'dated' XP look).
· Added: Workaround for a firmware bug in the 'Read Track Information' command on the Asus DVD-E616P (FW: 1.04) drive.
· Added: An 'ImgBurn' icon at the 'All Programs' top level within the start menu (Only Windows Vista+).
· Added: Support for reading the layer break position from the image file descriptor within a Nero (NRG) image file.
· Added: Options that allow the user to override which info should be used to create the program's internal disc layout info. (1 = TOC, 2 = Disc/Track Info, 3 = Disc Capacity (Basic single session/track!)) Buggy firmware on certain drives may benefit from using TOC info for DVD media rather than the now default Disc/Track Info.

· Added: 'Explorer' style file manager pane to the top of the Disc Layout Editor window (can be disabled via a button on the existing toolbar).
· Added: New 7.95GB, 23.3GB and 46.6GB file splitting options so the individual image file parts can be archived on DVD+R DL, BD-R or BD-R DL media.
· Added: An option so the user can control whether or not the program will not halt logging after 'too many' (1000) messages.
· Added: Option in the settings to automatically make the Disc Layout Editor window 'stay on top' (joins the existing one for the Write Queue window).
· Added: The user can now decide if 'Reparse Point' (A.K.A 'Junction') files/folders are included when scanning for files/folder to add to the compilation.
· Added: Option to prevent the program from blocking AutoPlay when it receives the 'QueryCancelAutoPlay' message from the OS (probably only when it's in the foreground).
· Added: Support for detecting when the user might be attempting to build a DVD Audio disc.

# Added: An 'Advanced' input mode to build mode where you have total control over the layout of the disc and can add new folders, change names etc. (i.e. you're no longer limited to burning an existing folder structure on your hard disc as-is)
# Added: Optional logging when hidden or system files/folders are skipped in Build mode due to the current settings (i.e. when 'Include Hidden Files' or 'Include System Files' are disabled).
# Added: Yet another attempt at setting the write speed - this one does it 100% by the book. It fills the fields in the performance descriptor sent via 'SET STREAMING' with the values returned in the descriptor after issuing the 'GET PERFORMANCE' command. (The previous best method of setting the speed missed one field out)
# Added: An option (off by default) to enable the enumeration of medium changer devices (this was previously always enabled) on the I/O tab in the Settings.