SpeedFan full changelog

4.52
-added full IPMI support
-added full support for IT IT8771E
-added full support for Intel Sunrise Point (Z170) SMBus
-added full support for STMicro STTS2004
-added full support for NCT6793D
-added full support for Giantec GT34TS04 and GT34TS02
-added support for Atom E3800 SMBus
-added support for Atom C2000 SMBus
-added support for Fintek F71878A/F71868A at non standard addresses
-enabled SMBus on Intel 6 Series / C20x, if needed
-fixed SCSI_PASS_THROUGH access on some systems
-skipped accessing those hard disks that return the ID Sector from another disk
-fixed Nuvoton NCT6791D and NCT6792D sixth fan readings
-added support for alternate registers of NCT6793D
-fixed German translation for CPU Usage

- added full support for Fintek F71811U
- added full support for Nuvoton NCT6106D
- added full support for Nuvoton NCT6792D
- added full support for Fintek F71878A/F71868A
- added full support for ITE IT8783F
- added full support for Intel C610/X99 SMBus
- added full support for ITE IT8620E
- added support for Nuvoton NCT6683D
- fixed Fintek F71808A PWM MODE setting
- added PWM 4 ENABLE and PWM 5 ENABLE to advanced options for the ITE IT8620E to enable or disable PWM 4 and 5 writes

Added support for Intel core temperature (Family 06h Model 3Ch)
Added support for Intel core temperature (Family 06h Model 3Eh)
Added support for AMD Family 15h temperature
Added support for AMD Family 16h temperature
Added support for Intel 8 Series Mobile SMBus
Added Nuvoton NCT6779D/NCT6791D advanced option to choose between PWM and DC output for System Fan (PWM 1)
Changed the way NCT6779D and NCT6791D read fan speeds
Added 4 more temperature readings to NCT6779D
Added Fintek F71808A advanced setting: PWM TYPE 3
Refined Fintek F71808A description for PWM MODEs
Added preliminary support for ITE IT8620E temperatures and fan speeds
Fixed a minor typo that caused Fintek F71808A to not show some temperatures properly

- fixed a typo that caused ACPI temperatures to be reported wrongly on some Windows 7
- changed the name of the installer to improve compatibility with Windows 8

- added support for hard disks through CSMI (Intel Matrix RAID and Intel Rapid Storage, for example)
- added support for Intel 7 Series SMBus
- added full support for NCT6779D
- added full support for Fintek F71808A
- fixed temperature reading for Intel Ivy Bridge
- fixed ATK0110 support on several motherboards
- switched to the new HddStatus service (it works on Unix/Linux too now)
- ARECA RAID support is not longer probed on Windows 2K
- limited DELL Studio 1558 support to the PWM alone for system stability
- added support for Seagate FreeAgentDesktop and FreeAgent USB enclosures

- greatly improved DELL support
- nVidia I2C support works again with driver 275+
- now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit)
- added support for Intel X79 (Patsburg) SMBus
- added support for ServerWorks HT1000 SMBus
- added SAT support for USB enclosures
- added support for USB enclosures using SunPlus, IoData and Logitech chipsets
- added voltage reading tweaks and configurations for several Intel motherboards
- added full support for Fintek F71858AD
- rewritten Areca RAID support and improved support for Areca SAS controllers

- added full support for ATI RADEON video cards (including CrossFire configurations and fan control)
- completely rewritten DELL support
- DELL support is now enabled on a wider range of models
- added full support for ITE IT8772F
- added support for Fintek F71889A
- added full support for SMSC EMC2103-1 and SMSC EMC2103-2
- added support for Fintek F71869AD
- added support for Fintek F71862 at unusual addresses
- preliminary support for SMSC SCH5317
- fixed Nuvoton W83627DHG-P PWM MODE advanced settings

-added full support for ATK0110
-added Advanced Fan Control including a graphical UI for configuration
-DELL support is now working on 64 bit systems too
-DELL support can change fan speeds, but if the BIOS is overriding it, there is little SpeedFan can do
-added support for ST STTS3000 and ST STTS2002 DIMM temperature sensors
-reported temperatures and fan speed on Sony Vaio VGN-FW21E
-fan speed is reported on some ASUS laptops with ATK0100 (like the F81Se and the K52JT)
-added preliminary identification of Fintek F71862
-PWM values can now be logged too
temperatures are no longer tied to every fan speed as a default
-added F71809 PWM setting and reading
-improved SMART hard disk temperature reading if multiple attributes seem to report it
-rebuilt ARECA DLL with latest library and improved Areca RAID support
-more aggressive behaviour setting PWMs (this might help on systems where something else tries to chang

- restored full nVidia video card support
- hard disk finding now uses more stringent rules that lead to a much faster program startup
- fixed configuration issues with multiple nVidia video cards on the same system
- greatly improved User Interface responsiveness
- administrator privileges are now required and enforced to run SpeedFan
- added full support for Nuvoton W83627DHG-P, including PWM control
- added full support for Nuvoton NCT6776F, including PWM control
- added full support for Fintek F71808E, including PWM control
- added full support for Fintek F71809, including PWM control
- added full support for ITE IT8728F, including PWM control

· greatly improved nVidia video card support
· added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
· improved Intel QST support
· Intel QST now checks first for 2.0, then falls back to 1.0, if needed
· added support for external USB drives using JMicron controllers
· fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
· MUTEXes used to synchronize with other tools while accessing buses are now defined Global
· fixed CPU usage bars size on the main window
· enabled SMBus access on ICH10 and ICH10R, if needed
· if SpeedFan service is unavailable, a message dialog is shown and the program stops running
· added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
· SEND REPORT now includes a list of ACPI devices found