TARGET 3001 full changelog

TARGET 3001! V32 stands still, the current version is now V33
iBOM: The rotation of the components on top/bottom was not always correct
Signal polygons (ground planes) have always pushed themselves into the foreground during selection with M1
DRC: The number of non-plated-through drill holes is displayed in the summary (if available)

Routing several tracks simultaneously with the Guided Bus Router (Preview V33)
For all autorouters: Route layers are checked for route capability beforehand (copper)
Settings / Options: Added DRC values to the topic "Project"

Component names and values to the handle..." places the name above and the value below the component center
Fixed a sporadic problem when using the Element Inspector
Preview messages can be disabled in the new "Settings" dialog completely

"Marching Ants" also when switching from schematic to PCB with Cross-Probe (Preview V33)
ODB++ output: Double or even multiple congruent outlines caused the output to get out of step

Bill of materials: The component property "BILL_OF_MATERIAL=TRUE" only overwrites "Components without package"

Dimension radius/diameter” in the menu of the small black boxes of an arc/torus (Preview V33)

Better finding: After searching and highlighting, the found elements are framed with "marching ants" lines
Improved the PDF output via script
Hold [Shift] or [Ctrl] for exact angles during mouse movement (45° grid, also for signal polygons, Preview V33)
3D view: The color of the PCB and of the silkscreen can be set in the context menu (M2)
Pick&Place: The board dimensions are output when outputting in text format, width, height, thickness
Variants: When deriving components from an example component, the marked components are preselected
Drill output with XGerber: Improvement, IF NPT drills are not output into an extra file (Non-Plated-Through)
Pick&Place as Excel: Component selection did not work correctly
Output of a list of points for an automatic adhesive dispenser as CSV or Excel file (Preview V33)
Color of air wires for new projects with dark background RGB $41FF41 and with light background RGB $008000
Pick&Place: Referencepoint of a package can also be pad 1
Improved pin overlapping in the schematic during symbol creation
Interactive Bill-of-Materials iBOM: Grouping of identical components improved

QR codes are also generated correctly when the PCB is viewed from the rear. Subsequent rotating remains prohibited
ToolTip also shows the layer of the elements in PCB view
Clearer message if STEP models are missing when loading a project
Corrected the size of the drill hole pictograms in the new settings dialog
Improved the position of dialogs and toast messages if more than one monitor is used
ODB++: Slices and 360° circles (tori) in the drilling layer are also output as drill holes

ODB++: SMD pads with an own drill hole were not always output as drill hole
PCB outline wizard: For round holes, the diameter is now specified instead of the radius
ASCII IO import/export can cope with oblong holes in pads and with "No aura for layers"
Block diagram repaired: All terminals had the pin number 1. Reo fixes this for old projects
ODB++: Pins with pin number 0 are not output to the component layers
ODB++ output, saving the project file and outputting ODB++ again could sometimes cause problems
ODB++: The subnet information was sometimes missing in the file ".stepspcbedadata"
The colors of the grid $808080 (dark gray) and $E0E0E0 (light gray) were sometimes reset to [Standard]
XGerber import: Select several XGerber files and a drill file at once or a ZIP with such files
XGerber import: "%" in a comment "G04" could disrupt the parser

"Angle dimensioning" in menu "Aktions" (Preview V33)
For Z3001 files, no Z3001OPEN file is generated any longer
Perfboard area: Vias are set to "always free of solder resist", regardless of the Gerber settings